Faculty

Institution

Unit

Venue

John Lambros

Willett Professor in Engineering

University of Illinois Urbana-Champaign

Affiliations

The Grainger College of Engineering

Department of Aerospace Engineering

John Lambros is currently serving as an Aerospace Engineering Willett Professor in Engineering at University of Illinois Urbana-Champaign.

Honors

Create free account to unlock more features

Experiences

Create free account to unlock more features

Education

Create free account to unlock more features

John Lambros

University of Illinois Urbana-Champaign

Willett Professor in Engineering

You can click a keyword to filter the displayed items

mechanical engineering mechanics of materials materials science fracture mechanics engineering applied physics deformation mechanical science mechanics solid mechanics mechanical testing crack formation dynamic crack propagation mechanical properties digital image correlation microstructure stressstrain analysis mechanical behavior composite structures composite interface metals plasticity advanced composite material (engineering) severe plastic deformation strain localization high strain rate low-cycle fatigue microstructure-strength relationship shock waves material research fiber-reinforced composites granular medium mechanical deformation precision engineering stress wave biomedical imaging intermetallics thermal engineering experimental mechanics fiber reinforcement impact loading work hardening polymer testing crystal growth thermomechanical analysis wave propagation composite science coherent gradient sensing material nonlinearities elasticity (physics) micromechanics micro-electromechanical systems structural concrete polymer modeling polymer properties material modeling finite element methods digital volume correlation strain rate highway pavements hastelloy x bimaterial interface dynamic decohesion thin plate polymer physics concrete technology crack growth strain accumulation asphalt concrete fatigue crack closure experimental observations quasi-static fracture experimental study granular media model composite systems dynamic fiber debonding dynamic failure mems devices

Notable Scholarly Works

Notable Federal Grants

Collaborators

A Comparative Study of the Modal Response of Additively and Subtractively Manufactured Thin Plates After Thermal Loading. Experimental Mechanics (2025)

M. WeihrauchP. LambertJ. LambrosC. J. SutcliffeE. A. Patterson

materials scienceengineeringdynamic responsemechanical engineeringcomposite structuresdirected energy depositionadvanced manufacturingresidual stressresidual stressesstructural mechanicsadvanced manufacturing technologiesmodal responsemechanical performance3d printingadditive manufacturingmechanics of materials

Identification Uncertainty in Inverse Material Model Parameter Determination: A Sensitivity‐Based Decision Process for Load Path Selection. Strain (2025)

S. S. FayadE. M. C. JonesD. T. SeidlJ. Lambros

engineeringdesign optimizationengineering optimizationstressstrain analysismechanical engineeringstructural analysismechanical modelingstructural optimizationfinite element method in structural mechanicsprescribed displacementfisher information matrixidentification uncertaintyengineering structuresmechanical testingmechanics of materials

Opening-Dominated Fracture Characterization of Single Crystal Spinel in the Transmission Electron Microscope. Experimental Mechanics (2025)

Y. ZhangS.J. DillonJ. Lambros

materials sciencemicrostructureopening-dominated fracture characterizationfracture mechanicsmechanical engineeringoptical propertiestransmission electron microscopecrystal researchcharacterization (materials science)single crystal spinelelectron microscopemicroscopy methodsmicroscopyelectron microscopyapplied physicsmechanical testingmechanics of materials

In Situ Measurements and Simulation of Residual Stresses and Deformations in Additively Manufactured Thin Plates. The International Journal of Advanced Manufacturing Technology (2024)

Pouria KhanboloukiRodrigo Magana-CarranzaChris SutcliffeEann PattersonJohn Lambros

situ measurementsmaterials scienceengineeringadditive manufacturingstressstrain analysisthin platesdeformationmechanical engineeringmechanical behaviorresidual stressesresidual stressadvanced manufacturing technologiesthin-walled structuremechanical testingmechanics of materials

Quantifying Residual Stresses Generated by Laser-Powder Bed Fusion of Metallic Samples. Conference proceedings of the Society for Experimental Mechanics (2024)

Pouria KhanboloukiRodrigo Magana-CarranzaEann PattersonChris SutcliffeJohn Lambros

materials scienceengineeringmanufacturing sciencedeformationmechanical engineeringmanufacturing technologyadvanced laser processingresidual stresslaser processing technologyresidual stresseslaser-powder bed fusionlaser-induced breakdownmetallic samplesmetalsmechanical testingmechanics of materials

Residual Stress Induced in Thin Plates During Additive Manufacturing. Conference proceedings of the Society for Experimental Mechanics (2024)

Eann A. PattersonJohn LambrosRodrigo Magana-CarranzaChristopher J. Sutcliffe

materials sciencemanufacturing sciencemechanical engineeringmanufacturing technologydirected energy depositionresidual stress inducedresidual stressadvanced manufacturing technologiesmanufacturingadditive manufacturingmechanics of materials

Considerations for the Identification of Elasto-Plastic Material Model Parameters. (2023)

Samuel FayadElizabeth JonesDaniel SeidlPhillip ReuJohn Lambros

materials sciencemechanical propertiesmechanical engineeringmechanical behaviorconstitutive modelingmechanical modelingplasticityadvanced composite material (engineering)mechanical sciencemechanics of materials

Creep Characterization of Amorphous Sio2 in the Transmission Electron Microscope Using Digital Image Correlation and Finite Element Analysis. Experimental Mechanics (2023)

Y. ZhangS. DillonJ. Lambros

thin filmsmaterials scienceamorphous sio2finite element analysiselectronic materialsmaterial researchsemiconductorsmicroscopyelectron microscopyapplied physicsamorphous solidcreep characterizationcharacterization (materials science)

Direct-Levelling Finite Element Analysis Data for Material Model Calibration Using Digital Image Correlation and Finite Element Model Updating.. (2022)

Samuel FayadPhillip ReuElizabeth JonesDaniel SeidlJohn Lambros

computer-aided designmechanical engineeringcalibrationcomputational mechanicsfinite element methodsfinite element method in structural mechanicsnumerical simulationsmaterial model calibrationengineeringdigital image correlation

Effect of Confinement on the Impact Response of a Granular Array. Experimental Mechanics (2022)

R. D. J. I. FonsekaP. H. GeubelleJ. Lambros

engineeringgranular arrayfracture mechanicsmechanical engineeringmechanicsgranular materialsimpact (mechanics)impact loadingblast loadingimpact responsegeomechanicsgranular mediumdispersion scienceshock wavesmechanics of materials

1
2
3
4
5
18
10 / page

John Lambros

Willett Professor in Engineering

University of Illinois Urbana-Champaign

Affiliations

The Grainger College of Engineering

Department of Aerospace Engineering

John Lambros is currently serving as an Aerospace Engineering Willett Professor in Engineering at University of Illinois Urbana-Champaign.

Honors

Create free account to unlock more features

Experiences

Create free account to unlock more features

Education

Create free account to unlock more features

John Lambros

University of Illinois Urbana-Champaign

Willett Professor in Engineering

You can click a keyword to filter the displayed items

Notable Scholarly Works

Notable Federal Grants

Collaborators

A Comparative Study of the Modal Response of Additively and Subtractively Manufactured Thin Plates After Thermal Loading. Experimental Mechanics (2025)

M. WeihrauchP. LambertJ. LambrosC. J. SutcliffeE. A. Patterson

Identification Uncertainty in Inverse Material Model Parameter Determination: A Sensitivity‐Based Decision Process for Load Path Selection. Strain (2025)

S. S. FayadE. M. C. JonesD. T. SeidlJ. Lambros

Opening-Dominated Fracture Characterization of Single Crystal Spinel in the Transmission Electron Microscope. Experimental Mechanics (2025)

Y. ZhangS.J. DillonJ. Lambros

In Situ Measurements and Simulation of Residual Stresses and Deformations in Additively Manufactured Thin Plates. The International Journal of Advanced Manufacturing Technology (2024)

Pouria KhanboloukiRodrigo Magana-CarranzaChris SutcliffeEann PattersonJohn Lambros

Quantifying Residual Stresses Generated by Laser-Powder Bed Fusion of Metallic Samples. Conference proceedings of the Society for Experimental Mechanics (2024)

Pouria KhanboloukiRodrigo Magana-CarranzaEann PattersonChris SutcliffeJohn Lambros

Residual Stress Induced in Thin Plates During Additive Manufacturing. Conference proceedings of the Society for Experimental Mechanics (2024)

Eann A. PattersonJohn LambrosRodrigo Magana-CarranzaChristopher J. Sutcliffe

Considerations for the Identification of Elasto-Plastic Material Model Parameters. (2023)

Samuel FayadElizabeth JonesDaniel SeidlPhillip ReuJohn Lambros

Creep Characterization of Amorphous Sio2 in the Transmission Electron Microscope Using Digital Image Correlation and Finite Element Analysis. Experimental Mechanics (2023)

Y. ZhangS. DillonJ. Lambros

Direct-Levelling Finite Element Analysis Data for Material Model Calibration Using Digital Image Correlation and Finite Element Model Updating.. (2022)

Samuel FayadPhillip ReuElizabeth JonesDaniel SeidlJohn Lambros

Effect of Confinement on the Impact Response of a Granular Array. Experimental Mechanics (2022)

R. D. J. I. FonsekaP. H. GeubelleJ. Lambros

1
2
3
4
5
18
10 / page

Similar Faculty Members

Armand Joseph Beaudoin

Institution

University of Illinois Urbana-Champaign

engineering

process modeling

Philippe Geubelle

Institution

University of Illinois Urbana-Champaign

mechanical engineering

high performance computing

Ioannis Chasiotis

Institution

University of Illinois Urbana-Champaign

additive manufacturing

mechanical engineering

Petros Sofronis

Institution

University of Illinois Urbana-Champaign

engineering

fracture mechanic

Catalin Picu

Institution

Rensselaer Polytechnic Institute

mechanics of solids

mechanical engineering

Alan Taylor Zehnder

Institution

Cornell University

engineering

computational solid mechanics

Iwona M Jasiuk

Institution

University of Illinois Urbana-Champaign

engineering

additive manufacturing

Martin Starzewski

Institution

University of Illinois Urbana-Champaign

stochastic partial differential equation

continuum mechanic

Huseyin Sehitoglu

Institution

University of Illinois Urbana-Champaign

engineering

fatigue crack growth

Michael Ernest Kassner

Institution

University of Southern California

severe plastic deformation

hot working

Similar Faculty Members

Armand Joseph Beaudoin

Institution

University of Illinois Urbana-Champaign

engineering

process modeling

Philippe Geubelle

Institution

University of Illinois Urbana-Champaign

mechanical engineering

high performance computing

Ioannis Chasiotis

Institution

University of Illinois Urbana-Champaign

additive manufacturing

mechanical engineering

Petros Sofronis

Institution

University of Illinois Urbana-Champaign

engineering

fracture mechanic

Catalin Picu

Institution

Rensselaer Polytechnic Institute

mechanics of solids

mechanical engineering

Alan Taylor Zehnder

Institution

Cornell University

engineering

computational solid mechanics

Iwona M Jasiuk

Institution

University of Illinois Urbana-Champaign

engineering

additive manufacturing

Martin Starzewski

Institution

University of Illinois Urbana-Champaign

stochastic partial differential equation

continuum mechanic

Huseyin Sehitoglu

Institution

University of Illinois Urbana-Champaign

engineering

fatigue crack growth

Michael Ernest Kassner

Institution

University of Southern California

severe plastic deformation

hot working